Need Help? We're here for you

ADICOM is a cleaning-technology brand focused on building faster, safer, and more hygienic cleaning tools for modern homes.

We design based on real cleaning pain points, engineer internal systems such as instant-steam heating and electric-pump rinse solutions, and focus on measurable cleanliness.

Busy families, pet owners, apartments and large homes, chemical-sensitive users, and anyone seeking efficient, hygienic cleaning.

A rapid-flow heating channel heats only the required water volume, producing fast and stable high-temperature steam.

Pressurized clean water jets penetrate microfiber fibers, removing dirt rather than redistributing it while keeping clean and dirty water separated.

Dual-tank separation, jet-rinse flow, high-temperature steam, and stable pressure control work together to prevent contamination.

Sealed floors, tiles, grout, upholstery, kitchen surfaces, glass, bathrooms, cars, and pet areas.

No. It uses only pure water, leaving no chemical residue and reducing bacterial presence.

A full tank supports several minutes of continuous cleaning, with fast refill capability.

Yes. Keep a safe distance to avoid oversaturation and move steadily.

It provides faster cycles, consistent force, deeper cleaning, zero contamination, and less physical effort.

Replace when the dirty-water tank reaches 70–80% capacity.

No. ADICOM is lightweight (around 2 lbs) and ergonomically balanced to reduce wrist strain.

Yes. ADICOM produces high‑pressure, high‑temperature steam with deeper penetration.

No. It heats in about 3 seconds much faster than traditional models.

No. The dual‑tank system ensures complete separation at all times.

No. The pump drives water downward to prevent splashing.

No. The tank is sized for medium‑to‑large homes without constant refills.

Kitchen grease, stove grates, ovens, bathroom tiles, edges, cars, fabric refresh, pet stains.

Twice weekly for maintenance, daily for pet-heavy areas.

Yes. No chemical residue remains; avoid directing steam at pets or heat-sensitive materials.

Use filtered or distilled water; run a descaling cycle if buildup appears.

Empty dirty water after each use, wipe monthly, and air-dry.

Possible causes: low water, mineral buildup, overheating protection, nozzle blockage.

Possible causes: empty clean tank, full dirty tank, pad misalignment, pump blockage.

Likely mineral buildup, nozzle distance, or heat loss; descaling helps restore performance.